Disclaimer:

• To achieve this result, you need to manually enable the 200 MP High Resolution mode and shoot outdoors in bright lighting. The final results may vary depending on the parameter settings and shooting conditions.
• vivo disclaims all warranty for accuracy and shall not be responsible for the results and results may vary basis experience and usage.
• Data is sourced from labs and refers to single-app usage duration. Test Conditions: Ambient temperature of 25°C±2°C, initial battery of 100%, Wi-Fi network used, screen at minimum brightness, muted, local video playback. Actual duration of use/standby may vary depending on the environment or other factors.
• Data is obtained from vivo's laboratory tests and refers to single-app operations only. Test environment: Ambient temperature 25°C±1°C. Test condition: With the device 100% charged. Actual battery life is subject to actual usage and may vary due to environmental and other factors.
• V70 FE is equipped with vivo standard charger, and supports up to 90W of charging power, subject to actual use and various external factors including electricity output.
• The charging data is sourced from vivo lab's environmental test results. Test environment: Ambient temperature of 25°C±1°C; Test conditions: charging with vivo's official standard charger while the phone is off and at 1% battery level. The Fast charging mode needs to be manually enabled. Navigate the following path to enable it for the first time: Settings > Battery > Battery health and charging > Fast charging. Actual charging speed may vary due to environmental or other factors.
• This product has been tested under controlled laboratory conditions, provides protection against tight dust, continuous immersion in water and high pressure and temperature water jets and is rated as IP68 and IP69 under IEC standard 60529-2013. IP68 water resistance test conditions: Submerged in static fresh water up to 1.5 meters for up to 120 minutes, with a temperature difference between the water and the device of less than 5°C. IP69 water resistance test conditions: A rotation speed of (5±1) rpm, nozzle angles of 0°, 30°, 60°, and 90°, a flow rate of (15±1) L/min, a water temperature of (80±5)°C, a test time of 30s/position, and the phone placed in a vertical position with the USB port facing down. This product is not a professional waterproof phone. The resistance to water, water jets and dust is not permanent and may be reduced with daily use. Do not immerse the phone in water during daily use or expose it to solutions such as seawater or other liquids such as beverages. Do not charge the phone when it is wet; instead, clean and dry it immediately. Damage caused by liquid ingress is not covered by warranty.
• Please follow the official guidelines when using this feature: Do not immerse the phone in non-fresh water during use. Please shoot underwater at a maximum depth of 1.5 meters and use it for no more than 30 minutes at a time. After using the phone underwater and removing it from the water, press and hold the corresponding button on the screen to exit the Underwater Mode and allow the water to drain. Then place the phone in a dry, well-ventilated area to dry. Avoid charging or connecting external devices to the USB port until it is completely dry. Please note that using high-temperature heating methods, such as hair dryers, during the drying process may damage the phone. Also note that due to differences in temperature and humidity, condensation and fogging may occur in the lens when the phone is immersed in water, which can be resolved by placing the phone in a constant temperature, low humidity environment for approximately 20 minutes. Damage caused by liquid ingress due to use of this feature without following official water resistance test conditions is not covered under warranty.
• Illustrative purposes only. The availability of this feature may vary depending on the device version. Please refer to the actual use.
• Check responses. Subscription required. Compatibility and availability varies. 18+. Create responsibly. Setup required.
• One-Tap Transfer is supported for iPhone 12 and newer models running iOS 17 or later with the EasyShare app version updated to 5.4 or later, while phones' NFC antenna areas are aligned. See the EasyShare app on iPhone for details. This feature requires third-party service support, which may change.
• Office Kit is available through brand licensor's application and subject to respective terms and conditions. vivo Mobile India Private Limited disclaims all warranty for accuracy and shall not be responsible for the results and results may vary basis experience and usage.